20 Gallon Cyclone II 3600W Polypropylene Gutter Vacuum System (Inc. 40ft Carbon Clamping Pole Kit & Bag)

Imagine arriving at a commercial property where gutters are packed with soaked leaves, dense sludge, and stubborn debris that has built up over time. Clearing it by hand from a ladder slows the job down, increases risk for your crew, and turns a profitable service into a physically draining task. The Cyclone II 3600W Commercial Polypropylene Gutter Vacuum, paired with a 40-Foot Carbon Pole Kit, helps crews handle demanding gutter cleanouts from the ground, making it faster to remove large amounts of wet debris while working more safely.

⚠️ Power Requirement

This commercial system operates at 240V / 50-60 Hz. For proper performance, it requires a gas-powered generator with at least 5000 peak watts, along with a 30-amp electrical source and a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

• Extreme 3600W Suction Power: Delivers the force needed to pull through compacted clogs, wet debris, and difficult gutter buildup with confidence (94.6 inches of water lift, 378 CFM). An automatic shut-off float valve helps protect the motor system by stopping suction when the tank reaches capacity, preventing liquid from entering the motor housing.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet helps create a strong cyclonic action inside the tank, improving separation between debris and airflow. This allows the vacuum to stay productive when tackling heavy, wet gutter waste.
• 20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene construction also holds up well in demanding commercial environments where wet debris and repeated use are part of the job.
• Welded Steel Cart with All-Terrain Wheels: Built on a reinforced welded frame with air-filled rear tires and locking front wheels, this setup rolls more easily across grass, gravel, and uneven work areas often found on commercial properties.
• Dual Reusable Filters: Includes a reusable cloth filter for standard cleaning and a foam filter for wet applications. Both are designed for repeat use, helping reduce maintenance costs and downtime from frequent replacements.
• Integrated Drain Hose: Makes emptying the tank faster and cleaner by allowing you to drain collected liquid without having to tip or lift the full machine.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Polypropylene (Corrosion-Resistant)
• Airflow: 378 CFM
• Water Lift: 94.6 inches
• Electrical: 240 Volts / 50-60 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2 inches ID) with Swivel Cuff
• Power Cord Length: 28 feet
• Weight: 61.5 lbs
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Frame: Welded Steel Cart with Tilting Chassis
• Additional Features: Drain Hose, Locking Front Casters, Pneumatic All-Terrain Rear Wheels

🧗 40 Foot Carbon Clamping Pole Kit

This carbon fiber pole kit helps commercial crews reach gutters up to four stories high while staying safely on the ground. The lightweight yet rigid sections reduce fatigue during long jobs, while the clamping system with textured grip and quick-lock design keeps each section secure during use.

Safety-Enhanced Kevlar Base Section

The lower section of the pole, where your hands stay in constant contact, is wrapped in DuPont™ Kevlar® for added reinforcement. This helps the pole handle everyday jobsite contact and provides a small added measure of protection in the event of accidental contact with a low-voltage wire. Because the remaining pole sections are made from conductive carbon fiber, you must always keep a safe distance from power lines and other electrical hazards.

Pole Kit Includes:

• 10 x 4 foot pole sections
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Straight Nozzle
• Aluminum Gulper Nozzle

This kit also includes a rugged pole carry bag to keep your equipment organized between jobs. Made from double-walled, tear-resistant polyester, it helps crews transport pole sections and nozzles more easily from the truck to the work area while keeping components protected during transit and storage.

🚚 Shipping Information

This commercial vacuum and pole kit ships through a third-party LTL (Less-Than-Truckload) freight carrier so it can arrive securely on a pallet. Once your order leaves our facility, we will send tracking information by email. After the shipment arrives at your local freight hub, the carrier will contact you directly to schedule a delivery appointment.