Working from a ladder while trying to pull out soaked leaves, packed sludge, and gutter muck can quickly turn into a frustrating and risky job around the house. When debris is too heavy to scoop by hand, and the ladder keeps forcing you to reposition, cleanup takes longer, feels harder on your body, and adds unnecessary danger. The 3600W Cyclone II Commercial Gutter Vacuum helps you handle clogged gutters from the ground, making residential cleanup safer, faster, and far less exhausting.
⚠️ Power Requirement
This machine runs on 240V/50Hz, so it is not compatible with a standard household wall outlet. It requires a dedicated gas-powered generator with at least 5000 peak watts from a 30-amp source, using a 4-prong NEMA push-and-twist socket to maintain proper and steady power during operation.
🚀 Key Features
Extreme 3600W Suction Power: With a 94.56" water lift and 379.6 CFM, this triple-motor setup is built to pull up stubborn wet and dry gutter debris with serious force. An automatic float valve adds protection by shutting off the motors once the tank reaches capacity, helping prevent water from reaching the motor area.
Optimized Cyclonic Airflow: The 2.8" ID aluminum side inlet helps create a strong cyclonic action inside the tank. This airflow pattern helps separate heavier debris from the air stream, supporting steady suction while handling wet leaves, sludge, and compacted buildup.
20-Gallon Stainless Steel Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. Its 22-gauge stainless steel construction gives you the room needed for longer cleaning sessions before disposal.
Enhanced Filtration System: A reusable foam filter handles wet debris, while the HEPA filter captures finer particles. This two-stage setup helps keep the motor area cleaner while supporting more consistent performance throughout the job.
Robust Steel Cart with All-Terrain Wheels: Moving through driveways, lawns, gravel paths, or uneven areas around a home is easier with the welded steel cart, pneumatic rear wheels, and front locking casters. It helps keep the machine stable and easier to move where it is needed.
Integrated Drain Hose: When the tank fills with collected water and wet debris, the built-in drain hose makes emptying easier without needing to tip the full machine over.
Motor Protection Deflector: Inside the tank, a metal deflector plate helps direct debris downward while adding a protective barrier between the collected waste and the motor head.
⚙️ Technical Specifications
Usage: Commercial
Running Wattage: 3600W
Motors: 3 x 1200 Watt
Tank Capacity: 20 Gallons
Tank Material: Stainless Steel (22-Gauge)
Airflow: 379.6 CFM
Water Lift: 94.56 inches
Electrical: 240 Volts / 50 Hz
Plug Type: 4-Prong NEMA (240V)
Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
This vacuum ships securely on a pallet through a third-party LTL freight provider. After your order ships, you will receive tracking details by email. Once the shipment reaches your local freight terminal, the carrier will contact you using the phone number on the order to arrange a delivery appointment.
Cyclone II 20 Gallon 3600W Triple Motor 240V Stainless Steel Commercial Gutter Vacuum
SKU: CVS76-3
Price:
Regular price
$2,011.00
Sale price
$2,011.00
Regular price
$2,292.00
You Saved $281.00 (12%)
Working from a ladder while trying to pull out soaked leaves, packed sludge, and gutter muck can quickly turn into a frustrating and risky job around the house. When debris is too heavy to scoop by hand, and the ladder keeps forcing you to reposition, cleanup takes longer, feels harder on your body, and adds unnecessary danger. The 3600W Cyclone II Commercial Gutter Vacuum helps you handle clogged gutters from the ground, making residential cleanup safer, faster, and far less exhausting.
⚠️ Power Requirement
This machine runs on 240V/50Hz, so it is not compatible with a standard household wall outlet. It requires a dedicated gas-powered generator with at least 5000 peak watts from a 30-amp source, using a 4-prong NEMA push-and-twist socket to maintain proper and steady power during operation.
🚀 Key Features
Extreme 3600W Suction Power: With a 94.56" water lift and 379.6 CFM, this triple-motor setup is built to pull up stubborn wet and dry gutter debris with serious force. An automatic float valve adds protection by shutting off the motors once the tank reaches capacity, helping prevent water from reaching the motor area.
Optimized Cyclonic Airflow: The 2.8" ID aluminum side inlet helps create a strong cyclonic action inside the tank. This airflow pattern helps separate heavier debris from the air stream, supporting steady suction while handling wet leaves, sludge, and compacted buildup.
20-Gallon Stainless Steel Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. Its 22-gauge stainless steel construction gives you the room needed for longer cleaning sessions before disposal.
Enhanced Filtration System: A reusable foam filter handles wet debris, while the HEPA filter captures finer particles. This two-stage setup helps keep the motor area cleaner while supporting more consistent performance throughout the job.
Robust Steel Cart with All-Terrain Wheels: Moving through driveways, lawns, gravel paths, or uneven areas around a home is easier with the welded steel cart, pneumatic rear wheels, and front locking casters. It helps keep the machine stable and easier to move where it is needed.
Integrated Drain Hose: When the tank fills with collected water and wet debris, the built-in drain hose makes emptying easier without needing to tip the full machine over.
Motor Protection Deflector: Inside the tank, a metal deflector plate helps direct debris downward while adding a protective barrier between the collected waste and the motor head.
⚙️ Technical Specifications
Usage: Commercial
Running Wattage: 3600W
Motors: 3 x 1200 Watt
Tank Capacity: 20 Gallons
Tank Material: Stainless Steel (22-Gauge)
Airflow: 379.6 CFM
Water Lift: 94.56 inches
Electrical: 240 Volts / 50 Hz
Plug Type: 4-Prong NEMA (240V)
Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
This vacuum ships securely on a pallet through a third-party LTL freight provider. After your order ships, you will receive tracking details by email. Once the shipment reaches your local freight terminal, the carrier will contact you using the phone number on the order to arrange a delivery appointment.
Select your state to see estimated delivery
Disclaimer: Estimated delivery times for FedEx and UPS are provided as general guidelines based on carrier information. Actual delivery may vary due to factors such as order processing time, weather conditions, peak shipping periods, or service disruptions. We are not liable for delays caused by FedEx or UPS once the order has been shipped.
Product Highlights
Cyclonic Side Inlet
The 2.8" ID side inlet creates a cyclonic effect for powerful suction and efficient debris removal from gutters.
Water Drain Hose
Built-in drain plug and hose enable quick and easy water drainage from the tank without needing to tip the machine.
Powerful Motor
Equipped with three two-stage 1200W motors, delivering a total power output of 3600W for tackling tough gutter cleaning tasks.
Enhanced Mobility
Locking front casters provide stability and easy maneuverability, making it simple to move the vacuum during use.
Product Components
1
Powerful Motor: Equipped with three 1200W two-stage bypass motors, offering powerful and efficient suction, ideal for demanding gutter cleaning tasks.
2
Efficient Side Inlet: Boasts a 2.8" ID side inlet that creates a cyclonic effect, enhancing suction and debris collection efficiency.
3
Large Tank Capacity: Features a 20-gallon stainless steel tank that handles large volumes of debris, reducing the frequency of emptying needed.
4
Durable All-Terrain Wheels: Includes pneumatic back wheels and locking front casters, facilitating smooth movement across various surfaces.
5
Convenient Drain Hose: Integrated with a drain hose, allowing for quick and easy liquid disposal without the need to tip the machine.
6
Robust Tipping Chassis: Comes with a sturdy steel frame and tipping chassis, ensuring easy debris disposal and durable performance.
Product Specifications
Model:
Gutter Pro Vac
Rated Power:
3 x 1200W Bypass Motors
Rated Voltage:
240V (Generator Required)
Normal Frequency:
50Hz / 60Hz
Air Flow (CFM):
379.6 cfm
Water Lift:
94.56 inches
Tank Capacity:
20 Gallon / 76L
Tank Material:
Stainless Steel
Weight:
73lbs / 33 Kg
Power Cord Length (ft):
28 Feet
Machine Comparison
Customer Reviews
As recommended by
Frequently Asked Questions about the Cyclone II 20 Gallon Stainless Steel
How does the Cyclone II 3600W compare to other gutter vacuums in terms of efficiency?
With its powerful 3600W motor and large capacity tank, the Cyclone II is efficient in handling extensive and challenging gutter cleaning jobs compared to standard models.
What warranty comes with the Cyclone II 3600W?
The GutterProVac accessories and housing are warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. This does not include replacement of items due to wear.
What are the voltage requirements for this vacuum?
The Cyclone II 3600W operates on a 240V power supply, suitable for commercial and industrial environments. Please note, it can only be used with a gas powered generator.
What type of generator is recommended for the Cyclone II 3600W?
We recommend a generator that offers a minimum of 6500 watts peak and is equipped with a 30 AMP electrical source, with a 4-prong NEMA push and twist socket to ensure compatibility and safe operation.
How portable is the Cyclone II 3600W gutter vacuum?
It features a locking front casters, pneumatic back wheels and a handle for easy mobility around job sites.
Can this vacuum handle wet and dry debris?
Yes, the Cyclone II 3600W is designed for both wet and dry applications, making it versatile for various gutter cleaning conditions.