What is the best water fed pole for window cleaning?

The best water fed pole depends on your cleaning needs and budget. For professional window cleaners, EquipMaxx offers a range of carbon fiber and aluminum water fed poles from entry-level to commercial-grade. Carbon fiber poles are lighter (important for all-day use) while aluminum poles are more affordable. EquipMaxx poles compete with Tucker USA, Unger, and Gardiner systems but often at more competitive price points with free shipping on qualifying orders.

How does water fed pole window cleaning work?

Water fed pole cleaning uses purified (deionized) water pumped through a telescoping pole to a brush head at the top. The process: 1) Tap water passes through a DI resin filter or RO system that removes minerals, 2) Purified water flows up the pole to the brush, 3) The brush agitates dirt on the glass while pure water rinses it away, 4) Because the water has zero mineral content, it dries spot-free with no squeegee needed. This method is safer (ground-level operation) and faster than traditional ladder-and-squeegee cleaning.

Water fed pole vs traditional squeegee - which is better?

Water fed poles are better for: residential homes (especially 2+ stories), repetitive route work, safety-conscious businesses, and speed on standard windows. Traditional squeegees are better for: interior windows, commercial storefronts at ground level, and achieving a specific polish on showcase glass. Most professional window cleaners use both methods — water fed poles like those from EquipMaxx for 80% of residential work, and squeegees for interior and ground-floor commercial jobs.

What equipment do I need to start a window cleaning business?

Essential window cleaning business equipment: 1) Water fed pole system with DI filtration ($300-1,500) — EquipMaxx offers complete starter kits, 2) Traditional squeegee set ($50-100), 3) Extension ladder for initial setup access ($200-400), 4) Bucket, scrubbers, and microfiber towels ($100), 5) Vehicle with water tank (55-100 gallon), 6) Business insurance and licensing. Total startup: $1,000-3,000 for a basic setup. A water fed pole system is the single most important investment — it lets you clean faster, safer, and reach higher.

How much does a water fed pole system cost?

Water fed pole systems range from $200 to $3,000+ depending on pole material, reach, and filtration. Budget aluminum poles: $200-400 (25ft reach). Professional carbon fiber poles: $500-1,200 (35-50ft reach). Complete systems with DI tank and pump: $800-2,000. High-end commercial setups with RO/DI filtration: $2,000-3,000+. EquipMaxx offers poles across all price ranges with options for both beginners and established businesses.

Best water fed pole under $500?

Under $500, your best options are aluminum water fed poles that reach 25-35 feet. EquipMaxx offers entry-level aluminum poles in this price range that are suitable for residential cleaning up to 3 stories. At this price point, prioritize: telescoping sections (not fixed), a good brush head with jets, and a reliable water connection. Upgrade to carbon fiber when your business can justify the $800-1,200 investment — the weight savings matter significantly after a full day of work.

What is the best solar panel cleaning equipment?

For professional solar panel cleaning, water fed poles with specialized rotating brush heads are the industry standard. EquipMaxx carries solar panel cleaning kits that include: soft-bristle rotating brushes (won't scratch panels), carbon fiber extension poles for roof access, and DI water filtration for spot-free drying. Key requirements: use only purified water (minerals leave residue that reduces panel efficiency), soft brushes only (no abrasive pads), and avoid cleaning in direct sunlight (thermal shock risk).

Best pressure washer surface cleaner for driveways?

For driveway cleaning, a pressure washer surface cleaner (also called a flat surface cleaner) is essential for even, streak-free results. Look for: 15-20 inch cleaning diameter for residential driveways, stainless steel housing (not plastic), dual rotating nozzles, and compatibility with your PSI rating. EquipMaxx offers surface cleaners rated for 2,000-4,000 PSI that work with most consumer and professional pressure washers. A surface cleaner cleans 4-5x faster than a standard wand and eliminates the striping pattern.

Are there any sales taxes applied to my purchase?

Sales tax is charged for items shipping to California, Washington, and Kentucky.

Can I purchase an extended warranty for my product?

I'm sorry, but we currently do not offer extended warranty options for our products.

When can I expect my order to ship?

Orders typically ship the same day if placed before 11 am Pacific time. Orders placed after this time usually ship the next business day.

What should I do if my package is delayed?

If your package is delayed, we apologize for any inconvenience this may have caused. In such cases, we recommend the following steps:Check Tracking: Firstly, check the tracking information provided with your order to see if there are any updates or notifications regarding the delay.Contact Carrier: If the tracking information doesn't provide clarity, we advise reaching out to the shipping carrier directly. They may have additional information about the status of your package and can provide assistance.Contact Us: If you're still unable to resolve the issue, please don't hesitate to contact our customer service team. We'll do our utmost to investigate the delay and provide you with the necessary support and updates.Rest assured, we understand the importance of timely delivery and will work diligently to ensure your package reaches you as soon as possible. Thank you for your patience and understanding.

1 13

Description

Imagine arriving at a commercial property where gutters are packed with soaked sludge, matted leaves, and dense buildup that has been left untouched for far too long. What should be a standard maintenance job quickly turns into a messy, risky task when crews are forced to work from tall ladders while pulling heavy debris out by hand. The Cyclone II Commercial Gutter Vacuum and 28-Foot Carbon Pole Kit turns that difficult cleanup into a ground-based process, helping you remove stubborn gutter waste while keeping your team safely off the ladder.

⚠️ Power Requirement

This commercial machine uses a 240V/30A electrical setup. It must be paired with a gas-powered generator capable of at least 5000 peak watts and 5500 running watts, and it requires a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

Extreme 3600W Suction Power: With 94.6 inches of water lift and 378 CFM, this system delivers the pulling force needed to clear heavy, water-soaked gutter debris in demanding commercial jobs. An integrated auto-shutoff float valve helps protect the machine by stopping airflow when the tank reaches capacity.
Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is positioned to create a strong cyclonic action inside the tank. This helps separate heavier debris from the airflow early, supporting more consistent suction as material collects.
20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene construction helps resist rust and dents in busy commercial environments.
Welded Steel Cart with All-Terrain Wheels: Built on a welded steel frame with a push handle, pneumatic rear wheels, and locking front casters, this setup moves more easily across gravel, grass, and uneven job sites while keeping the unit steady during use.
Dual Reusable Filters: Includes one reusable cloth filter for standard debris collection and one foam filter for moisture control. Both filters can be cleaned and reused for continued operation.
Integrated Drain Hose: The built-in drain hose makes it easier to release collected water without awkward lifting or tipping, helping crews empty the tank faster between jobs.

⚙️Vacuum Technical Specifications:

Usage: Commercial
Running Wattage: 3600W
Motors: 3 x 1200 Watt
Tank Capacity: 20 Gallons
Tank Material: Polypropylene (Corrosion-Resistant)
Airflow: 378 CFM
Water Lift: 94.6 inches
Electrical: 240 Volts / 50-60 Hz
Plug Type: 4-Prong NEMA (240V)
Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
Included Hose: 16 feet (2 inches ID) with Swivel Cuff
Power Cord Length: 28 feet
Weight: 61.5 lbs
Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
Frame: Welded Steel Cart with Tilting Chassis
Additional Features: Drain Hose, Locking Front Casters, Pneumatic Rear Wheels

🧗 28-Foot Carbon Clamping Pole Kit

Clear gutters at heights of up to three stories while working from the ground. These carbon fiber pole sections are lightweight and rigid, helping reduce flex while maintaining better control at full extension. Quick-release clamps and textured grip areas support faster setup and more comfortable handling during long commercial jobs.

Safety-Enhanced Kevlar Base Section

The bottom section of the pole, where the operator grips and guides the system, is wrapped in woven DuPont™ Kevlar®. This added layer helps the pole handle common job site bumps and scrapes while also providing an extra layer of protection in the event of brief, accidental contact with overhead power lines.

Please be aware that most of the pole is made from carbon fiber, which conducts electricity. The Kevlar layer does not make the pole insulated or safe for use near high-voltage hazards. Always inspect the work area carefully and keep away from all power lines during operation.

Pole Kit Includes:

28 ft Pole: 7 x 4 foot pole sections
135-degree Silicone U-Bend
Aluminum Angled Nozzle
Aluminum Crevice Nozzle
3 Silicone Hose Adaptors (2-inch - 2-inch, 2-inch - 1 1/2-inch, and 2-inch - 1 3/4-inch)

This complete kit also includes a double-walled carry bag in a separate storage solution for your pole system and accessories. Made from high-friction-resistant fabric, it helps keep the carbon sections, nozzles, and adaptors organized and easier to carry from the truck to the job site.

🚚 Shipping Information

Your equipment is carefully secured on a pallet and shipped through a professional LTL (Less-Than-Truckload) freight carrier. Once your order has been picked up, we will provide the tracking PRO number along with the name of the freight company. After the pallet reaches your local freight terminal, the carrier will contact you directly to schedule a delivery appointment.

20 Gallon Cyclone II 3600W Polypropylene Gutter Vacuum System (Inc. 28ft Carbon Clamping Pole Kit & Bag)

SKU: CVP76-3-28ft-carbon-clamping-poles-bag-kit

NOTE: Due to the size and weight of the tank, it will ship via LTL. We will provide you shipping details once it has left our warehouse. Please allow 2-3 days to ship.

Product variants

$3,066.00 ~~$3,604.00~~ YOU SAVED $538.00 (15%)

Shipping calculated at checkout.

In stock

Quantity

Secure Checkout
Fast U.S. Shipping
Easy Returns
Trusted by Pros

One Year Warranty

Financing Plan Available

Responsive Service

American Owned

View full details

Description

Imagine arriving at a commercial property where gutters are packed with soaked sludge, matted leaves, and dense buildup that has been left untouched for far too long. What should be a standard maintenance job quickly turns into a messy, risky task when crews are forced to work from tall ladders while pulling heavy debris out by hand. The Cyclone II Commercial Gutter Vacuum and 28-Foot Carbon Pole Kit turns that difficult cleanup into a ground-based process, helping you remove stubborn gutter waste while keeping your team safely off the ladder.

⚠️ Power Requirement

This commercial machine uses a 240V/30A electrical setup. It must be paired with a gas-powered generator capable of at least 5000 peak watts and 5500 running watts, and it requires a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

Extreme 3600W Suction Power: With 94.6 inches of water lift and 378 CFM, this system delivers the pulling force needed to clear heavy, water-soaked gutter debris in demanding commercial jobs. An integrated auto-shutoff float valve helps protect the machine by stopping airflow when the tank reaches capacity.
Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is positioned to create a strong cyclonic action inside the tank. This helps separate heavier debris from the airflow early, supporting more consistent suction as material collects.
20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene construction helps resist rust and dents in busy commercial environments.
Welded Steel Cart with All-Terrain Wheels: Built on a welded steel frame with a push handle, pneumatic rear wheels, and locking front casters, this setup moves more easily across gravel, grass, and uneven job sites while keeping the unit steady during use.
Dual Reusable Filters: Includes one reusable cloth filter for standard debris collection and one foam filter for moisture control. Both filters can be cleaned and reused for continued operation.
Integrated Drain Hose: The built-in drain hose makes it easier to release collected water without awkward lifting or tipping, helping crews empty the tank faster between jobs.

⚙️Vacuum Technical Specifications:

Usage: Commercial
Running Wattage: 3600W
Motors: 3 x 1200 Watt
Tank Capacity: 20 Gallons
Tank Material: Polypropylene (Corrosion-Resistant)
Airflow: 378 CFM
Water Lift: 94.6 inches
Electrical: 240 Volts / 50-60 Hz
Plug Type: 4-Prong NEMA (240V)
Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
Included Hose: 16 feet (2 inches ID) with Swivel Cuff
Power Cord Length: 28 feet
Weight: 61.5 lbs
Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
Frame: Welded Steel Cart with Tilting Chassis
Additional Features: Drain Hose, Locking Front Casters, Pneumatic Rear Wheels

🧗 28-Foot Carbon Clamping Pole Kit

Clear gutters at heights of up to three stories while working from the ground. These carbon fiber pole sections are lightweight and rigid, helping reduce flex while maintaining better control at full extension. Quick-release clamps and textured grip areas support faster setup and more comfortable handling during long commercial jobs.

Safety-Enhanced Kevlar Base Section

The bottom section of the pole, where the operator grips and guides the system, is wrapped in woven DuPont™ Kevlar®. This added layer helps the pole handle common job site bumps and scrapes while also providing an extra layer of protection in the event of brief, accidental contact with overhead power lines.

Please be aware that most of the pole is made from carbon fiber, which conducts electricity. The Kevlar layer does not make the pole insulated or safe for use near high-voltage hazards. Always inspect the work area carefully and keep away from all power lines during operation.

Pole Kit Includes:

28 ft Pole: 7 x 4 foot pole sections
135-degree Silicone U-Bend
Aluminum Angled Nozzle
Aluminum Crevice Nozzle
3 Silicone Hose Adaptors (2-inch - 2-inch, 2-inch - 1 1/2-inch, and 2-inch - 1 3/4-inch)

This complete kit also includes a double-walled carry bag in a separate storage solution for your pole system and accessories. Made from high-friction-resistant fabric, it helps keep the carbon sections, nozzles, and adaptors organized and easier to carry from the truck to the job site.

🚚 Shipping Information

Your equipment is carefully secured on a pallet and shipped through a professional LTL (Less-Than-Truckload) freight carrier. Once your order has been picked up, we will provide the tracking PRO number along with the name of the freight company. After the pallet reaches your local freight terminal, the carrier will contact you directly to schedule a delivery appointment.