20 Gallon Cyclone II 3600W Polypropylene Gutter Vacuum System (Inc. 28ft Carbon Clamping Pole Kit & Bag)

Imagine arriving at a commercial property where gutters are packed with soaked sludge, matted leaves, and dense buildup that has been left untouched for far too long. What should be a standard maintenance job quickly turns into a messy, risky task when crews are forced to work from tall ladders while pulling heavy debris out by hand. The Cyclone II Commercial Gutter Vacuum and 28-Foot Carbon Pole Kit turns that difficult cleanup into a ground-based process, helping you remove stubborn gutter waste while keeping your team safely off the ladder.

⚠️ Power Requirement

This commercial machine uses a 240V/30A electrical setup. It must be paired with a gas-powered generator capable of at least 5000 peak watts and 5500 running watts, and it requires a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

• Extreme 3600W Suction Power: With 94.6 inches of water lift and 378 CFM, this system delivers the pulling force needed to clear heavy, water-soaked gutter debris in demanding commercial jobs. An integrated auto-shutoff float valve helps protect the machine by stopping airflow when the tank reaches capacity.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is positioned to create a strong cyclonic action inside the tank. This helps separate heavier debris from the airflow early, supporting more consistent suction as material collects.
• 20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene construction helps resist rust and dents in busy commercial environments.
• Welded Steel Cart with All-Terrain Wheels: Built on a welded steel frame with a push handle, pneumatic rear wheels, and locking front casters, this setup moves more easily across gravel, grass, and uneven job sites while keeping the unit steady during use.
• Dual Reusable Filters: Includes one reusable cloth filter for standard debris collection and one foam filter for moisture control. Both filters can be cleaned and reused for continued operation.
• Integrated Drain Hose: The built-in drain hose makes it easier to release collected water without awkward lifting or tipping, helping crews empty the tank faster between jobs.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Polypropylene (Corrosion-Resistant)
• Airflow: 378 CFM
• Water Lift: 94.6 inches
• Electrical: 240 Volts / 50-60 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2 inches ID) with Swivel Cuff
• Power Cord Length: 28 feet
• Weight: 61.5 lbs
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Frame: Welded Steel Cart with Tilting Chassis
• Additional Features: Drain Hose, Locking Front Casters, Pneumatic Rear Wheels

🧗 28-Foot Carbon Clamping Pole Kit

Clear gutters at heights of up to three stories while working from the ground. These carbon fiber pole sections are lightweight and rigid, helping reduce flex while maintaining better control at full extension. Quick-release clamps and textured grip areas support faster setup and more comfortable handling during long commercial jobs.

Safety-Enhanced Kevlar Base Section

The bottom section of the pole, where the operator grips and guides the system, is wrapped in woven DuPont™ Kevlar®. This added layer helps the pole handle common job site bumps and scrapes while also providing an extra layer of protection in the event of brief, accidental contact with overhead power lines.

Please be aware that most of the pole is made from carbon fiber, which conducts electricity. The Kevlar layer does not make the pole insulated or safe for use near high-voltage hazards. Always inspect the work area carefully and keep away from all power lines during operation.

Pole Kit Includes:

• 28 ft Pole: 7 x 4 foot pole sections
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Crevice Nozzle

This complete kit also includes a double-walled carry bag in a separate storage solution for your pole system and accessories. Made from high-friction-resistant fabric, it helps keep the carbon sections, nozzles, and adaptors organized and easier to carry from the truck to the job site.

🚚 Shipping Information

Your equipment is carefully secured on a pallet and shipped through a professional LTL (Less-Than-Truckload) freight carrier. Once your order has been picked up, we will provide the tracking PRO number along with the name of the freight company. After the pallet reaches your local freight terminal, the carrier will contact you directly to schedule a delivery appointment.