16 Gallon Cyclone Classic Pro 2200W Residential Gutter Vacuum System (Inc. 28ft Carbon Clamping Pole Kit & Bag)

Want to clear overflowing gutters, packed leaves, and soggy debris without climbing up a ladder or spending hours doing it by hand? This 16 Gallon Cyclone Classic Pro 2200W Gutter Vacuum with the included 28-Foot Carbon Clamping Pole Kit gives homeowners a safer way to handle gutter cleaning from the ground, especially around single-story homes and many two-story residential properties.

🚀 Key Features:

• Dual-Motor Power (2200W): Two 1100W motors deliver strong suction for pulling out wet leaves, sludge, standing water, and other gutter buildup commonly found around the home. A built-in float valve helps shut off airflow when the tank reaches capacity, helping protect the system during wet pickup.
• Optimized Cyclonic Side Inlet: The 2-inch ID polypropylene side inlet is shaped to create a strong cyclonic action inside the tank, helping debris move more smoothly while supporting strong airflow and suction during pickup.
• 16-Gallon Stainless Steel Tank: Offers space-saving dimensions yet packs a strong punch like its 20-gallon sister. It gives you a practical balance of tank capacity and mobility, so you can handle residential gutter cleaning with fewer interruptions for emptying.
• Welded Steel Frame with All-Terrain Wheels: The cart is built to move smoothly across driveways, patios, and lawn areas around the home. Large rear wheels and locking front casters help keep the unit steady while making it easier to position as you work.
• Reusable Cloth Filter: Made for both wet and dry use, this washable filter helps keep maintenance simple while cutting down on replacement costs over time.
• Integrated Drain Hose: Draining collected water is quicker and cleaner with the built-in hose, making post-job cleanup much easier.

⚙️Vacuum Technical Specifications:

• Usage: Residential/Light Commercial
• Running Wattage: 2200W
• Motors: $2 \times 1100\text{W}$
• Tank Capacity: 16 Gallons
• Tank Material: Stainless Steel
• Airflow: 119 CFM
• Water Lift: 95 inches
• Electrical: 120 Volts
• Plug Type: 3-prong (120V)
• Side Inlet: 2-inch ID Cyclonic Side Inlet (Polypropylene)
• Included Hose: 16 feet long (2-inch ID)
• Power Cord Length: 35 feet
• Dimensions (w/ Cart): 38 inches H $\times$ 17 inches W $\times$ 17.5 inches D
• Weight: 52 lbs
• Additional Features: Tilting Chassis, Drain Hose, Front Locking Casters, All-Terrain Rear Wheels

🧗 28 Foot Carbon Clamping Pole Kit

Cleaning second-story or even third-story gutters at home can be difficult when you do not have enough reach from the ground. The lightweight carbon fiber clamping poles give you the height needed to clean gutters up to approximately 2–3 stories high, while the clamping design helps keep each section secure during use. The non-slip finish supports better handling, and the quick-release clamps help make setup faster and less tiring.

Safety-Enhanced Kevlar Base Section

The lower section of the carbon gutter pole, which is the part you hold during use, includes an integrated layer of DuPont™ Kevlar® woven into the carbon fiber. This added reinforcement helps protect the most frequently handled part of the pole from everyday knocks and accidental drops that can happen around the house or jobsite. It also adds a level of resistance in the event of brief, unintended contact with an electrical source such as a power line.

It is still very important to remember that the pole is primarily made from carbon fiber, which conducts electricity. The Kevlar layer does not make the pole safe to use around high-voltage lines or other serious electrical hazards. Always keep a safe distance from any electrical source during use.

Pole Kit Includes:

• 7 x 4 foot pole sections (28 ft Pole)
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Straight Nozzle
• Aluminum Gulper Nozzle

This system also includes a reinforced pole carry bag for storing and transporting the carbon fiber pole sections and nozzles. The bag features a long zippered opening for easier access, side and top handles for lifting, and a padded shoulder strap for more comfortable carrying.

🚚 Shipping Information

Because of the size of this gutter vacuum kit, it ships on a pallet through a third-party Less-Than-Truckload (LTL) freight carrier to help ensure safe delivery. After pickup, you will receive an email with the freight carrier details, your PRO or tracking number, and a link to follow the shipment. Once the pallet reaches the local terminal, the freight company will contact you directly to arrange a delivery appointment.