20 Gallon Cyclone II 3600W Stainless Steel Gutter Vacuum System (Inc. 20ft Carbon Clamping Pole Kit & Bag)

When commercial gutters are packed with soaked leaves, roof grit, sludge, and standing water, the cleanup can quickly turn into a slow, messy, and risky job. Reaching high sections by ladder while dealing with heavy debris adds strain to the workday and increases the chance of slips and falls. The Cyclone II 3600W Commercial Gutter Vacuum and 20-foot carbon fiber pole kit is built for those demanding conditions, helping crews clear tough gutter blockages from the ground with speed, control, and confidence.

⚠️ Power Requirement

This commercial-grade machine requires a 240V / 30A power source for operation. It is intended for use with a gas-powered generator supplying at least 5000 peak watts and equipped with a 4-prong NEMA push-and-twist outlet.

🚀 Key Features:

• Extreme 3600W Suction Power: With 94.56 inches of water lift and 379.6 CFM airflow, this system is built to remove thick sludge, soaked leaves, and heavy debris from commercial gutters. An integrated auto-shutoff float valve stops the motor once the tank reaches capacity, helping protect the system from water overflow.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is designed to create a strong cyclonic action inside the tank. This helps separate wet, heavy debris from the airflow more effectively, so suction stays more consistent throughout demanding cleanup jobs.
• 20-Gallon Stainless Steel Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. It is especially useful for commercial jobs where long runs of gutter need to be cleared without constant interruption.
• Enhanced Filtration System: A foam and HEPA filter combination captures larger debris as well as fine dust. This two-stage setup helps keep the motors cleaner and supports smoother operation during demanding use.
• Robust Steel Cart with All-Terrain Wheels: The vacuum sits on a welded steel cart with large pneumatic rear wheels for easier movement across grass, gravel, and uneven surfaces. This makes it easier to reposition the system around commercial properties and job sites.
• Integrated Drain Hose: Built-in drainage allows collected water to be emptied quickly and with less mess. This makes cleanout easier without needing to lift or tip a full stainless steel tank.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Stainless Steel (22-Gauge)
• Airflow: 379.6 CFM
• Water Lift: 94.56 inches
• Electrical: 240 Volts / 50 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2-inch ID)
• Power Cord Length: 28 feet
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Weight: 73 lbs
• Frame: Welded Steel Cart with Pneumatic Rear Wheels
• Additional Features: Drain Hose, Tilting Mechanism, Front Locking Casters

🧗 20 Foot Carbon Clamping Pole Kit

This lightweight carbon fiber pole kit gives commercial users the reach and control needed for second-story gutter cleaning, approximately 20 feet high, without the excessive flex common in lower-grade poles. Each section locks securely with a quick-release clamping system, while the textured finish helps improve handling and reduce fatigue during longer jobs.

Safety-Enhanced Kevlar Base Section

The base section of the pole, where hands are positioned most often, features a layer of DuPont™ Kevlar® woven into the carbon fiber. This added reinforcement helps the lower section handle the scrapes and bumps that come with regular commercial use while supporting a longer service life. It also adds a measure of protection in the event of brief, accidental contact with low-voltage electrical sources such as residential service drops.

Please note that the pole is still primarily made of carbon fiber, which remains conductive. This added reinforcement does not make the equipment safe for use near high-voltage lines or major electrical hazards. Always keep a safe distance from all power sources when the pole is extended.

Pole Kit Includes:

• 20 ft Pole- 5 x 4 foot pole sections
• 135-degree Silicone U-Bend
• Narrow Cleaning Nozzle
• Wide Cleaning Nozzle

This system also includes a separate pole transport bag to help keep your gear organized between jobs. The bag is made with double-walled fabric and a protective inner liner to help shield your carbon fiber pole sections during transport, and it also features an oversized pouch for storing nozzles and adaptors in one place.

🚚 Shipping Information

All gutter vacuum kits are securely packed on a pallet and shipped via LTL freight service. Once your order has been picked up, tracking details and carrier information will be provided. When the pallet reaches your local freight terminal, the carrier will contact you directly to schedule a delivery appointment.