20 Gallon Cyclone II 3600W Polypropylene Gutter Vacuum System (Inc. 20ft Carbon Clamping Pole Kit & Bag)

When gutters on commercial properties are packed with soaked leaves, thick sludge, and heavy debris several feet above the ground, the job quickly becomes slow, messy, and risky. Reaching high sections by ladder can expose crews to unnecessary hazards, while hauling equipment up and down wastes valuable time on-site. The Cyclone II 3600W Gutter Cleaning Vacuum with the 20-Foot Carbon Pole Kit is built to handle demanding commercial cleanups from ground level, helping crews move faster while reducing ladder-related risk.

⚠️ Power Requirement

This commercial system requires a 240V / 30A power source for operation. We recommend using a gas-powered generator rated for at least 5,000 peak watts and 5,500 running watts, equipped with a 4-prong NEMA push-and-twist outlet.

🚀 Key Features:

• Extreme 3600W Suction Power: Removes compacted wet leaves, heavy muck, and stubborn debris from commercial gutters with a strong lifting force (94.56 inches of water lift, 378 CFM). An automatic shut-off float valve activates when the tank reaches capacity to help protect the motors from moisture.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet helps create a strong cyclonic action inside the tank, improving debris separation and helping the unit maintain steady pulling performance even when handling saturated waste.
• 20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene tank also helps resist dents and chemical exposure in demanding commercial environments.
• Welded Steel Cart with All-Terrain Wheels: A reinforced steel cart, large pneumatic rear wheels, and locking front casters make it easier to move across gravel, grass, mud, and uneven commercial job sites.
• Dual Reusable Filters: Includes a washable cloth filter for wet and dry use, along with a secondary foam filter for added protection. This setup helps reduce the recurring cost of disposable filter replacements.
• Integrated Drain Hose: Makes liquid disposal cleaner and more convenient. Instead of lifting and tipping a full tank, you can empty collected water directly through the built-in drain hose.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Polypropylene (Corrosion-Resistant)
• Airflow: 378 CFM
• Water Lift: 94.56 inches
• Electrical: 240 Volts / 50-60 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-inch ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2 inches ID) with Swivel Cuff
• Power Cord Length: 28 feet
• Weight: 61.5 lbs
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Additional Features: Tilting Chassis, Drain Hose, Pneumatic Rear Wheels

🧗 20 Foot Carbon Clamping Pole Kit

Commercial gutter cleaning often means reaching upper-story gutters repeatedly throughout the day, and heavier pole systems can wear crews down fast. This 20-foot carbon fiber pole kit helps you clean up to two stories high while staying safely on the ground. Its lightweight feel, rigid build, clamping mechanism, and non-slip exterior help reduce flex and minimize strain on the arms and shoulders during longer jobs.

Safety-Enhanced Kevlar Base Section

The bottom pole section is reinforced with DuPont™ Kevlar® in the area that sees the most handling during daily use. This added layer helps protect the pole from common bumps and drops on busy job sites. It also provides a secondary layer of insulation in the event of accidental contact with low-voltage sources. Carbon fiber is still conductive, so proper clearance from power lines and all electrical hazards must always be maintained.

Pole Kit Includes:

• 20 ft Pole- 5 x 4 foot pole sections
• 135-degree Silicone Angled Head
• Narrow Cleaning Nozzle
• Wide Cleaning Nozzle

A pole carry bag is also included to help keep your kit organized during transport and storage. Made from double-walled, abrasion-resistant polyester, it helps protect the carbon pole sections while giving you one place to store your nozzles and adapters between jobs.

🚚 Shipping Information

This commercial vacuum system and its components ship securely on a pallet through a third-party less-than-truckload (LTL) freight carrier. After processing, you will receive your tracking number (PRO) along with the freight carrier details. Once the shipment arrives at your local freight terminal, the carrier will contact you to schedule a delivery appointment.