27 Gallon Cyclone II 3600W Stainless Steel Gutter Vacuum System (Inc. 20ft Carbon Clamping Pole Kit & Bag)

When commercial gutters are packed with soaked leaves, sludge, and stubborn buildup, the job quickly becomes slower, messier, and more dangerous when crews have to keep climbing and repositioning ladders. The 27-Gallon Cyclone II Commercial Gutter Vacuum with the 20-Foot Carbon Pole Kit is built for those demanding jobs, helping operators clear serious blockages from the ground while covering larger areas with better control. Its 3600W triple-motor setup delivers the pulling power needed for tough commercial cleanups, while the stainless steel tank gives you the capacity to stay on the job longer with fewer interruptions.

⚠️ Power Requirement

This commercial vacuum requires a dedicated 240V / 30-amp power source. It is intended for use with a gas-powered generator capable of supplying at least 5000 peak watts and equipped with a 4-prong NEMA push-and-twist outlet for steady, dependable operation throughout the workday.

🚀 Key Features:

• Extreme 3600W Suction Power: Three 1200W motors deliver 94.5 inches of water lift and 379.6 CFM airflow to remove packed leaves, thick sludge, and waterlogged debris from commercial gutters. An integrated auto shut-off float valve stops suction when the tank reaches capacity, helping protect the motors from water exposure.
• 27 Gallon Stainless Steel Tank: This large-capacity stainless steel tank stores a high volume of debris, reducing how often you need to stop and empty the machine so your crew can stay focused on active cleaning longer.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is designed to create a strong cyclonic action inside the tank, helping maintain steady suction while improving separation of wet and heavy debris.
• Welded All-Terrain Cart: The steel cart is fitted with large pneumatic rear wheels and locking front casters, making it easier to move the unit across gravel, grass, pavement, and uneven commercial job sites.
• Dual Reusable Filter System: This setup includes a washable cloth filter for different types of debris, along with a foam sleeve for the float valve. Both are reusable, helping reduce recurring replacement costs.
• Integrated Drain Hose: The built-in drain hose makes disposal of liquid waste much easier by letting you empty the tank in a cleaner, more controlled way without removing the motor head.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 27 Gallons
• Tank Material: Stainless Steel
• Airflow: 379.6 CFM
• Water Lift: 94.5 inches
• Electrical: 240 Volts / 60 Hz
• Plug Type: 4-prong NEMA (240V)
• Side Inlet: 2.8-in ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2 inches ID)
• Power Cord Length: 28 feet
• Dimensions (w/ Cart): 39 inches H x 20 inches W x 20 inches D
• Weight: 65.9 lbs
• Frame: Welded Steel Cart with Pneumatic Rear Wheels and Locking Casters

🧗 20 Foot Carbon Clamping Pole Kit

Reaching second-story commercial gutters is safer and more manageable with lightweight carbon fiber poles that stay rigid at working height. This 20-foot pole kit gives crews the control needed to guide debris out of the gutter accurately while helping reduce strain during extended cleaning jobs. The textured grip and snap-lock clamps keep the setup secure and straightforward on site.

Safety-Enhanced Kevlar Base Section

The base section of the pole, where the operator has the most contact, is reinforced with DuPont™ Kevlar® woven into the carbon fiber. This added reinforcement helps protect the section that sees the most daily wear from scrapes and impact. While the Kevlar weave adds an extra layer of protection against accidental contact with utility lines, carbon fiber is still conductive. Always keep a safe distance from electrical lines and other high-voltage hazards.

Pole Kit Includes:

• 20 ft Pole - 5 x 4 foot pole sections
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Straight Nozzle
• Aluminum Gulper Nozzle

This system also includes a protective pole carry bag. It keeps your carbon fiber pole sections and nozzles organized in one place, making transport, storage, and job site setup much easier for commercial crews on the move.

🚚 Shipping Information

Because of the commercial size of this vacuum system and pole kit, the order is secured on a pallet and shipped through an LTL (Less-Than-Truckload) freight carrier to help prevent transit damage. Once your order leaves our facility, we will email the freight carrier details along with your PRO tracking number. The freight company will then contact you directly to schedule a delivery appointment for your location.