Description
When gutters start overflowing with wet leaves, sludge, and packed debris, climbing a ladder to clear them out can quickly turn into a risky and messy job. The Cyclone 2200W Gutter Vacuum and 20 Foot Carbon Fiber Pole Kit lets you handle gutter cleaning from the ground, giving you a safer way to remove stubborn blockages around the home without dealing with ladders, scooping by hand, or dragging around buckets of debris.
🚀 Key Features:
-
Dual-Motor Suction Power (2200W): Two 1100W motors produce 88.65 inches of water lift and 200.22 CFM of airflow to pull up wet leaves, sludge, and standing water with strong, steady suction. A built-in float valve helps protect the motors by stopping suction when the tank reaches full capacity.
-
Optimized Cyclonic Airflow: The 2.8-inch aluminum side entry helps create a strong cyclonic action inside the tank, improving debris separation and helping the vacuum maintain consistent suction during demanding wet gutter cleanouts.
-
20-Gallon Polypropylene Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. The polypropylene build also helps keep the tank practical for regular residential use.
-
Reusable Dual-Filter System: Includes a washable cloth filter and foam motor sleeve, making it easy to switch between wet and dry pickup without relying on disposable bags.
-
Reinforced Steel Chassis: The welded steel frame, tilt feature, and rubber wheels make the unit easier to move and empty around driveways, walkways, and yard areas.
⚙️Vacuum Technical Specifications:
-
Usage: Residential
-
Running Wattage: 2200W
-
Motors: 2 x 1100 Watt
-
Tank Capacity: 20 Gallons
-
Tank Material: Polypropylene
-
Airflow: 200.22 CFM
-
Water Lift: 88.65 inches
-
Electrical: 120 Volts / 60 Hz
-
Plug Type: 3-prong (120V)
-
Side Inlet: 2.8-inch ID Aluminum Cyclonic Side Entry
-
Included Hose: 16 feet (2-inch ID)
-
Power Cord Length: 28 feet
-
Dimensions: 42 inches H x 20 inches W x 20 inches D
-
Weight: 61.5 lbs
-
Frame: Welded Steel with Tilting Chassis
🧗 20 Foot Carbon Clamping Pole Kit
The included carbon fiber clamping poles give you the reach needed to clean gutters up to approximately two stories high while staying on the ground. Each section is lightweight and rigid, helping you keep better control during use, while the quick-release clamps and non-slip surface make setup and handling easier during residential cleanups.
Safety-Enhanced Kevlar Base Section
The lower section of the carbon gutter pole, where your hands are placed during operation, is reinforced with a layer of DuPont™ Kevlar® woven into the carbon fiber structure. This added layer strengthens the section you handle most and helps it hold up better against common bumps and accidental drops during use. It also adds a bit of extra resistance in the event of brief accidental contact with an electrical source, such as an overhead wire.
Because the pole is primarily made from carbon fiber, it is still electrically conductive. The Kevlar reinforcement does not make the pole safe for use around high-voltage lines or serious electrical hazards. Always keep a safe distance from any electrical source during operation.
Pole Kit Includes:
- 20 ft Pole: 5 x 4 foot pole sections
- 135-degree Silicone U-Bend: 1 piece
- Aluminum Angled Nozzle: 1 piece
- Aluminum Straight Nozzle: 1 piece
- Aluminum Gulper Nozzle: 1 piece
- Silicone Hose Adaptors: 3 pieces (2-inch - 2-inch, 2-inch - 2 1/4-inch, and 2-inch - 1 3/4-inch)
A protective pole carry bag is also included for easier storage and transport of the carbon fiber pole sections and nozzles. Made with double-wall polyester and an abrasion-resistant liner, it helps keep the kit organized while protecting the parts between uses.
🚚 Shipping Information
Gutter vacuums and kits ship on a pallet through a third-party LTL (Less-Than-Truckload) freight carrier. Once the order is picked up, you will receive an email with the freight carrier details and tracking number. The freight company will then contact you directly to schedule a delivery appointment after the shipment arrives at your local depot.