20 Gallon Cyclone II 3600W Stainless Steel Gutter Vacuum System (Inc. 40ft Carbon Clamping Pole Kit & Bag)

Trying to clear packed, waterlogged gutter debris from a commercial property while working off a ladder can quickly turn into a slow, risky, and exhausting job. Thick sludge, soaked leaves, and stubborn blockages are difficult to remove by hand, especially when you need to reach higher sections and awkward angles. The Cyclone II 3600W Gutter Vacuum with its 40-foot carbon fiber pole kit, is built for these demanding situations, helping crews clean from the ground while handling serious debris buildup across commercial jobs. It delivers the steady pulling force needed to move through tough gutter cleanouts with less climbing and fewer interruptions.

⚠️ Power Requirement

This machine runs on a 240V/50Hz power supply and requires a dedicated gas generator for operation. For reliable performance, your generator must provide at least 5000 peak watts through a 30-amp, 4-prong NEMA push-and-twist outlet.

🚀 Key Features:

• Extreme 3600W Suction Power: This unit delivers strong, consistent suction with 94.56 inches of water lift and 379.6 CFM airflow, helping move wet leaves, dense debris, and built-up gutter waste with confidence. An internal float valve automatically stops airflow when the tank reaches capacity to help protect the motors from collected liquid.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is designed to create a strong cyclonic action inside the tank. This improves debris separation and helps maintain effective pickup when dealing with soaked material and heavier gutter buildup.
• 20-Gallon Stainless Steel Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time.
• Enhanced Filtration System: Equipped with reusable foam and HEPA filters, this setup helps maintain strong airflow while capturing both fine dust and larger debris to support cleaner motor operation.
• Robust Steel Cart with All-Terrain Wheels: The vacuum is mounted on a welded steel cart with large pneumatic rear wheels, making it easier to move across gravel, grass, mud, and uneven commercial work areas.
• Integrated Drain Hose: Removing collected water is more manageable with the built-in drain hose, allowing you to empty the tank without having to lift or tip a full container.
• Motor Protection Deflector: A metal internal shield helps direct incoming debris downward into the tank, reducing direct contact with the motor housing during operation.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Stainless Steel (22-Gauge)
• Airflow: 379.6 CFM
• Water Lift: 94.56 inches
• Electrical: 240 Volts / 50 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-inch ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2-inch ID)
• Power Cord Length: 28 feet (Heavy Gauge 240V)
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Weight: 73 lbs
• Frame: Robust Welded Steel Cart with Handles
• Additional Features: Drain Hose, All-Terrain Pneumatic Rear Wheels, Front Locking Casters

🧗 40 Foot Carbon Clamping Pole Kit

These lightweight yet rigid carbon fiber poles give you the reach needed to clean gutters up to approximately 4 stories high, or around 40 feet, while maintaining better control during demanding jobs. The quick-release clamps allow fast height adjustments, helping reduce strain during longer commercial cleanouts.

Safety-Enhanced Kevlar Base Section

The bottom pole section, which sees the most regular handling on the job, is reinforced with DuPont™ Kevlar® woven into the carbon fiber. This adds extra reinforcement to the section most exposed to daily wear from transport, setup, and active use. While the Kevlar layer may offer limited resistance if the pole accidentally brushes a power source, carbon fiber still conducts electricity. This tool is not rated for use near high-voltage lines, and a wide, safe distance from all electrical hazards must always be maintained.

Pole Kit Includes:

• 40 ft Pole- 10 x 4 foot pole sections (For 3-4 stories)
• 135-degree Silicone Angled Head
• Aluminum Narrow Nozzle
• Aluminum Wide Nozzle

This system also comes with a Pole Carry Bag. This storage bag helps keep your carbon fiber pole sections and accessories together in one place, reducing surface scuffs during transport and making it easier to carry the full kit between your vehicle and the job site.

🚚 Shipping Information

This gutter cleaning vacuum system is secured on a pallet and shipped via LTL freight carrier. After pickup, you will receive tracking information, and once the shipment reaches the carrier’s local terminal, the freight company will contact you directly to arrange a delivery appointment.