20 Gallon Cyclone II 3600W Stainless Steel Gutter Vacuum System (Inc. 28ft Carbon Clamping Pole Kit & Bag)

When commercial gutters are packed with soaked leaves, sludge, and standing water, the job quickly becomes slow, messy, and unsafe when crews have to work from ladders. The 3600W Cyclone II Commercial Gutter Vacuum, paired with the 28-Foot Carbon Clamping Pole Kit, helps crews handle those demanding cleanups from the ground, reducing climbing risks while making it easier to move through larger properties with better speed and control.

⚠️ Power Requirement

This unit is built for commercial-level performance and runs on 240V/50Hz, which requires a dedicated gas-powered generator. For proper operation, your generator must supply at least 5000 peak watts through a 30-amp source and use a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

• Extreme 3600W Suction Power: With 94.56 inches of water lift and 379.6 CFM airflow, this system is built to pull through thick sludge, soaked debris, and standing water in demanding commercial gutter conditions. An internal float valve automatically stops airflow when the tank reaches capacity, helping protect the motor heads from moisture.
• Optimized Cyclonic Airflow: The 2.8-inch aluminum side inlet is designed to create a strong cyclonic action inside the tank, helping separate heavier debris from the airflow so the system can continue working more effectively through demanding cleanups.
• 20-Gallon Stainless Steel Tank: Offers large-capacity debris storage, reducing the frequency of stops for emptying and maximizing active cleaning time. This makes it especially useful for commercial jobs where crews need to keep moving without constant interruptions.
• Enhanced Filtration System: A combination of foam and HEPA filters helps capture everything from wet gutter sludge to fine dust, supporting cleaner operation and helping protect internal components during repeated commercial use.
• Robust Steel Cart with All-Terrain Wheels: A welded steel cart with oversized pneumatic rear wheels helps keep the unit steady and easy to move across gravel, grass, pavement, and uneven commercial job sites.
• Integrated Drain Hose: A built-in external drain hose allows collected liquids to be emptied quickly without needing to lift or tip the stainless steel tank, making cleanup easier after wet gutter jobs.
• Motor Protection Deflector: A built-in metal deflector helps push incoming debris downward into the tank, reducing direct contact with the motor assembly during operation.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 20 Gallons
• Tank Material: Stainless Steel (22-Gauge)
• Airflow: 379.6 CFM
• Water Lift: 94.56 inches
• Electrical: 240 Volts / 50 Hz
• Plug Type: 4-Prong NEMA (240V)
• Side Inlet: 2.8-inch ID Cyclonic Side Inlet (Aluminum)
• Included Hose: 16 feet (2-inch ID)
• Power Cord Length: 28 feet (Heavy Gauge 240V)
• Dimensions (w/ Cart): 42 inches H x 20 inches W x 20 inches D
• Weight: 73 lbs
• Frame: Welded Steel Cart with Tilting Chassis
• Additional Features: All-Terrain Pneumatic Rear Wheels, Front Locking Casters, Drain Hose

🧗 28-Foot Carbon Clamping Pole Kit

These rigid carbon fiber poles give commercial crews the reach needed for gutters up to three stories high while keeping the work on the ground. The non-slip outer surface and quick-release clamps help provide a secure grip and faster setup, making long-reach gutter cleaning more manageable across larger jobs.

Safety-Enhanced Kevlar Base Section

The bottom section of the pole includes a layer of DuPont™ Kevlar® woven into the carbon fiber. This added reinforcement strengthens the section that sees the most handling and helps protect it from scrapes and drops that can happen on active job sites. While this layer can offer limited protection during brief accidental contact with overhead cables, carbon fiber remains conductive. Always keep a safe distance from power lines and all electrical hazards.

Pole Kit Includes:

• 28 ft Pole: 7 x 4 foot pole sections
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Crevice Nozzle

A double-walled carry bag is also included to help keep the pole system protected and organized between jobs. It provides a dedicated room for the pole sections and nozzles, making it easier to store the kit in your vehicle and transport it from one commercial site to the next.

🚚 Shipping Information

Due to its size and weight, this commercial vacuum is palletized and shipped through a third-party LTL (Less-Than-Truckload) freight carrier. After your order is processed, you will receive a tracking number. Once the shipment reaches your local terminal, the freight carrier will contact you directly to arrange a delivery window.