40 Foot Reach Carbon Fiber Clamping Gutter Pole Kit (10 Poles) with Nozzles, Quick Release Clamps and Circlips

Three-story gutters are where ladder work gets genuinely dangerous. Setting up, leveling, and repositioning an extension ladder that high eats time and puts you at real risk with every reset. This kit clears 40 feet of reach from solid ground, so third-story gutters get cleaned without a ladder or scaffolding anywhere in the picture.

Ten carbon fiber poles clamp together with a quick-release mechanism and reinforced ring, so you build to full height fast and break the kit back down just as quickly. At 40 feet the material choice matters more than ever: each pole weighs just 16.5 ounces, which keeps the assembled stack controllable overhead instead of fighting you the whole time. An internal stop barrier keeps the sections from pushing together too far, so setup and teardown stay clean and predictable. The clamp locks each pole firmly at the height you need, the non-slip handle gives you a secure, comfortable grip, and the corrosion-resistant carbon build shrugs off rust and rot season after season. A silicone u-bend, two aluminum nozzles, and three silicone hose adapters round out the kit and fit standard wet/dry vacuum hoses.

🚀 Safety-Enhanced Kevlar Base Section

The lower section of the pole, where your hands do most of the gripping and handling, includes DuPont™ Kevlar® woven into the carbon fiber itself. This added layer helps reinforce the area that sees the most contact during setup, carrying, and use around the home. It also adds an extra margin of safety in the event of brief, accidental contact with overhead lines or other electrical sources.

It is still important to remember that the pole is mainly made of carbon fiber, and carbon fiber conducts electricity. The Kevlar reinforcement does not protect against high-voltage lines or serious electrical hazards. Always keep a safe working distance from power lines and any electrical source while operating the pole kit.

SPECIFICATIONS:

⚙️Pole Kit Includes:

• 10 carbon fiber clamping poles (one Kevlar-reinforced base pole) for a 40 foot, three-story reach
• Quick-release clamps with reinforced ring and internal stop barrier
• Silicone u-bend
• Two aluminum nozzles
• Three silicone hose adapters for standard wet/dry vacuum hoses
• Circlips

Reach three stories of gutter without ever leaving the ground. Light in the hand, quick to set up, and built to hold up job after job, this kit turns the tallest and riskiest gutter work into a straightforward ground-level task.