16 Gallon Cyclone Classic Pro 3600W Stainless Steel Commercial Gutter Vacuum System (Inc. 20ft Carbon Clamping Pole Kit & Bag)

Dragging a ladder around a job site all day isn't just exhausting—it’s a massive liability waiting to happen. Every time you climb up to reach a clogged gutter, you're risking a fall and slowing down your workflow. The Cyclone Classic Pro 16-Gallon Gutter Vacuum and 20-Foot Carbon Pole Kit changes the game by letting you clear out the nastiest sludge and debris while keeping your boots firmly on the grass. This triple-motor, 3600W beast gives you commercial-grade power so you can ditch the heights and finish jobs in half the time.

⚠️ Power Requirement:

This commercial vacuum requires a 240V/30A electrical source and must be used with a gas-powered generator providing a minimum of 5000 peak watts (5500 running watts) with a 4-prong NEMA push-and-twist socket.

🚀 Key Features:

• Extreme 3600W Suction Power: Delivers massive pull (95" water lift, 342.6 CFM) to suck up dry leaves, packed-in dirt, and heavy wet sludge. An auto shut-off float valve protects the motor once the tank hits its limit.
• Optimized Cyclonic Airflow: The 2-inch ID polypropylene side inlet creates a high-speed internal spinning motion, maximizing suction and efficiently separating heavy wet waste from the air.
• 16-Gallon Stainless Steel Tank: Designed with a compact size for easy transport between job sites while still delivering the same raw power as our 20-gallon models.
• Welded Steel Cart with All-Terrain Wheels: Built on a tough steel frame with pneumatic rear tires and locking front casters, making it easy to roll over mulch, gravel, or thick grass.
• Reusable Cloth Filter: Works for both wet and dry jobs. It’s easy to wash out, saving you from the constant hassle and cost of buying disposable filters.
• Integrated Drain Hose: Quickly drain liquids from the tank without heavy lifting, simplifying cleanup.

⚙️Vacuum Technical Specifications:

• Usage: Commercial
• Running Wattage: 3600W
• Motors: 3 x 1200 Watt
• Tank Capacity: 16 Gallons
• Tank Material: Stainless Steel
• Airflow: 342.6 CFM
• Water Lift: 95 inches
• Electrical: 240 Volts / 50 Hz
• Plug Type: 4-prong NEMA (240V)
• Side Inlet: 2-inch ID Cyclonic Side Inlet (Polypropylene)
• Included Hose: 16 feet (2-inch ID)
• Power Cord Length: 35 Feet
• Dimensions (w/ Cart): 38 inches H x 17 inches W x 17.5 inches D
• Weight: 52 lbs
• Frame: Welded Steel Cart with Tilting Chassis
• Additional Features: Drain Hose, Tires, Rear Wheels/Front Locking Casters

🧗 20-Foot Carbon Clamping Pole Kit

These lightweight, rigid carbon fiber poles give you the reach to clean up to two stories (approx. 20 feet) with total control. The non-slip surface and quick-release clamps make the system easy to assemble and move, significantly reducing arm fatigue during long workdays.

Safety-Enhanced Kevlar Base Section

The bottom section, where you grip the pole, is reinforced with a layer of DuPont™ Kevlar® woven into the carbon fiber. This toughens up the area most prone to wear and tear, protecting your gear from the usual bumps and drops of a busy job site. While this layer offers an extra buffer against brief, accidental contact with overhead lines, remember that the pole is primarily carbon fiber, which conducts electricity. Always stay well away from power lines and electrical hazards.

Pole Kit Includes:

• 20 feet of poles—5 x 4-foot pole sections
• 135-degree Silicone U-Bend
• Aluminum Angled Nozzle
• Aluminum Straight Nozzle
• Aluminum Gulper Nozzle
• 3 Silicone Hose Adaptors (2-inch - 2-inch, 2-inch - 1 1/2-inch, and 2-inch - 1 3/4-inch)

This system features a rugged carry bag for organized storage and effortless transport of the carbon fiber poles and accessories.

🚚 Shipping Information

This system is shipped on a pallet via a third-party LTL freight provider. Once picked up, you’ll receive an email with your tracking number. The shipping company will call you to schedule a specific delivery window once it arrives at your local depot.